• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Tranny shift problem

monsterjam5000

New member
When I get on the sway and drive for say ten miles then get off and try some city driving my car shifts funny. It will get up to 3000 Rpms then slip some up to 3500 rpms then shift to second and it's a hard shift. What ahold I do it only happens after eway driving. I was think flush fill with new filter and gasket but have heard bad things about doing that people told me it will stir up drit in trans and cause problems Let me know thanks
 


trans flushes done right will not hurt the car... i had mine flushed/filter/fluids... noticed a big difference.. just go to a respectable shop to have it done... have it scanned for codes first.
 
Also I raced a couple times last night and it would not sift out of first until six grand it would hit five grand fast then slowly go to six grand then shift. Well that slowly go to six grand part is slowing me down is this normal. What brand and kind of trans fluid do I use thanks
 
Brand and can't I get full synthic to mix with the regular that's already in there. Also the I was told dexron lv not dexron vl Are your sure it takes vl in a 1998 trans
 


Y I didn't mean flush I was talking about a filter change and that only drains out about 5 quarts so it will be 5 quarts new and the rest old. So will it be ok to put in 5 quarts of new trans fluid
 
monsterjam5000;362316 I was think flush fill with new filter and gasket but have heard bad things about doing that people told me it will stir up drit in trans and cause problems Let me know thanks[/QUOTE said:
mmmk... so what are u gonna do, flush it or fluid filter change... exactly how dirt is gonna get in trans im confused.
 
Fluid filter changed. Not sure on how dirt gets in trans that's just what I was told maybe they mean metal that magnet did not get. I just want to do a fluid filter change and use full synthetic
 
Back
Top