• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Tranny Rebuild Help!!

GTP89

GTP89

New member
Hey guys wanted to get some suggestions as far as what is needed to safely run say 330whp-350whp at Max. I have a VS Cam build nothing big just a decent mild build, Gen V 3.4 on 91oct and 3.2-3.0 on e85 stock heads, N* TB, Prj wires, autolites 103, 180tstat, 8 rib setup, SLP headers, Borla Catback, Poly mounts, #60 injectors, Prj Tune.
I always like to over shoot on power for a Trans to be on the safe side incase I decide to mod it more.

So far I have a 7/8 chain setup a harden 4th and a 4340 IS. As far as anything else goes what else needs to get upgraded to have a reliable tranny? Do I just take it to a shop and tell me to install all stock new clutches and I will be safe?

Any help is appreciated guys. Also there is a guy here selling a sonnax upgraded valve body should I get that or have it sent to TEP and have him do mine?
 


Triple edge is the way to go for a great trans. You already have the expensive parts. Talk to Dave about the build because he will also build the Channel plate and valve body to your power levels.
 
I sent him a email last week but never got a reply back, I will most likely give him a call later today once I get off work.

But as far as everything else like the clutches do I just use the original ones but new? Also am I missing anything else here for the Trans?
 
He was on vacation last week. May be a little slow hearing back from him until he catches up on his emails.

I go with what Dave says...Borg Warner HE frictions usually.
 
Would that be all that I need besides what I have listed? I ask because i need to provide the parts and going to take it to a guy to do install it all.
 
You must log in or register to reply here.
Back
Top