TR55 or TR6

[Bio248]

if youre stock, stay with stock gap of 0.060".

 

[Rico]

Dont want to start new thread and just want a confirmation before i go buy stuff in the next couple days.

I have 01 GTP with intake so autolite 605's would be best with stock wires or taylor and gapped at 0.50 ?

If i cant get the autolites out here what would be my next best choice for the basically the same plug? and would it also be gapped at 0.50

It may be difficult to gap those plugs at 1/2 inch. You should probably try 50 thousandths (0.050") or about 1.27mm.:th_winking:

 

[blazed16]

if youre stock, stay with stock gap of 0.060".

Ahh ok i was going with what post #3 said do .050 gap . So now should i go with autolite 606 or the 605's with the .060 gap? I just found a local place i can get both.

 

[blazed16]

I bought both 606's and 605's today lol what should i go with? just cold air intake is all i have.

 

[matt5112]

606

 

[blazed16]

606

Ok thanks.

 

[blueguy]

Because post #3 kicks the ass.

 

[blazed16]

Because post #3 kicks the ass.

So are u saying 606's gap at 0.050 or 0.060 u guys are confusing me lol..
Or 605's with stock pully with one of the above gaps

 

[matt5112]

0.060

 

[blazed16]

Well guys got the plugs and wires in today.the 1 back plug right in front of the 02 sensor was very hard to dther then that went pretty well...
The plugs that were in there looked original but were nkg crappy looking plugs.the gap on them was over 70 lol.