• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Topswap question

TheDarkAngel

TheDarkAngel

New member
So I was wondering, after I topswap my 2000 GT, can I run a stock GTP PCM until I get mine tuned? I know I would have to do a security and case relearn, but that's no problem.
 


Code: 
A stock GTP pcm wont work unless you change the VIN and what not I dont think. You'll need at least a basic tune to start it.

EDIT: The more I think about it, I dont see why it wouldnt... except the VINs being different...
 
Good point....hmmmm...there's no one around me to tune on a dyno or anything, so I have to get a canned tune from ZZP or somewhere.
 


When I did my '97 GT, I used that pcm and just adjusted the timing and fueling. Started with a stock timing table from an '02 GTP, and ran it rich to start off then slowly leaned it out. I also had an xp and ssic on there, and only a 3.5" pulley so I wasn't worried about kr. Without a powrtuner I wouldn't even have considered doing all that work, without a tuner, why not just go L67/hd swap and use the gtp pcm? Or is it already too late for that?
 
I've been looking around for canned tunes, and ZZP has theirs offered with either a topswap option (another $75), or their L36 Supercharger Kit option which is free...I know the kit comes with fuel logs, but would that change anything? I figured I can select the swap kit option and save $75 because it'll be the same?
 
You must log in or register to reply here.
Back
Top