Top Swapping this weekend. Just 2 questions.

[Runicdionysus]

Hey guys,
I'm top swapping this weekend and there's just a few things I'm confused about. 1) Where does the tensioner that doesn't go on the cast-iron bracket bolt to? 2) Where does the MAP Sensor bracket go?
Thanks.

 

[Scottydoggs]

pulley 9 is off in this pic. is sits on that stand by the crank.

 

[timboku]

Be sure to put all 3 bolts that hold that pulley bracket on. 0ne of them gets threaded into the water jacket. If you dont put all of them in you will leak coolant. Ask me how i know...lol.

Scotty seems like you have posted hat belt routing pic like 10 times today..lol

 

[Scottydoggs]

it does. lol

use thread sealant on any bolts in the water jacket. or it can also leak.

 

[Runicdionysus]

pulley 9 is off in this pic. is sits on that stand by the crank.

Thanks guys. What about the Map sensor and bracket? where do those bolt to?

 

[Sven the Sexman]

MAP sensor and bracket get bolted to the rear cylinder head/intake manifold area...there's two bolt holes there for it.

 

[Scottydoggs]

back side of the sc. its next to the evap solenoid. they get bolted down with a bracket that goes to where the sc bolts down.

 

[BillBoost37]

MAP sensor and bracket get bolted to the rear cylinder head/intake manifold area...there's two bolt holes there for it.

The two extra holes on the SC that is.