• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Top swap bin file?



Dont mean to hijack but first off thanks for the info. I spun a bearing in my 98 gtp and got a replacement l67 in place. Well come to find out it had 19lb injectors on a sc fuel rail which leads me to believe its a n/a engine that has been top swapped. So i put my 36lb injectors on and my old fuel rail on it but if it is a n/a bottom end with higher compression my pcm will work fine? I will be watching the kr and thing elsr I should keep an eye on?
 
chuck1718 said:
Dont mean to hijack but first off thanks for the info. I spun a bearing in my 98 gtp and got a replacement l67 in place. Well come to find out it had 19lb injectors on a sc fuel rail which leads me to believe its a n/a engine that has been top swapped. So i put my 36lb injectors on and my old fuel rail on it but if it is a n/a bottom end with higher compression my pcm will work fine? I will be watching the kr and thing elsr I should keep an eye on?
Click to expand...

I don see why the pcm wouldnt work. Not an expert but it should be fine. Im sure somebody will back me up.
 
we dont have 19 lb injectors at all, but the na injector is smaller then a sc injector. so running the l67 injector is the way to go.

if it is a top swap you need to watch your kr, they hate timing. and if you have stock exhaust manifolds still that could cause a lot of kr cause top swaps need flow mods.
 


Alright thanks guys if I see high kr ill pull my sc belt or stay out of boost pulling the belt will be alot easier for me. Then ill get some headers once Im able to
 
You must log in or register to reply here.
Back
Top