• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Tools to cut bumper frame off (Intercooled People)

GOTIT4CHEAP16

GOTIT4CHEAP16

New member
Question for people who are full size intercooled. What did you guys use to cut the piece of the bumper frame off to fit the FMHE?


Will a dremel be enough?
IMAG0471.jpg
 


i used a sawsall, the dremel will work. get the reinforced disks though. and make sure you paint the cuts to prevent rust.
 
Bill on some of the FMHE, wbodystore is the one i have, you mount it to the bumper bar. this causes it hang too low and you cant put the air dim back on. so you have to cut the bottom half of the bumper bar and trim some of the plastic on the air dim.
 
my WBS core is in there.

Hangs down (which i dont like) but all i had to do was drill a small hole in the latch support and it bolted right up.

Also cut the ducting to fit around the FHME.

BillBoost37 said:
Whatchoo talking about Willis?

I tossed in a big ole FMHE onto FourSixer's car last night and didn't need to cut.
Click to expand...

There was no hood latch support there.
 
Last edited:


im not a fan of no hood latch support, my bumper hangs too low. and i might not be able to go back in when put the trans cooler on :(
 
I mounted mine under the support. Having kids in my car I wasnt going to risk saftey in a frontal collision by weaking the support. my FMHE is a
Stage 2 core dimensions: 23" wide x 7" height x 3 1/2" thick
Just my two cents. heres how mine hangs
Aaronscar014.jpg
 


mine is that same size one 01 and it was that low for 3 days before i moved it up, im lowered so it was close to the ground and would be the first thing to get hit if something small was in the road and was unavoidable.
 
You're also going to want to use a sawzall or a die grinder, for cutting the support. A dremel will take a year of sundays lol.
 
Hope he doesn't mind, but I stole these pics off a local car club friends facebook Shawn Larsen. And here's how he did his and how I will be doing mine... Makes it so you can put the plastic piece back on the bottom to help channel the air and just make it look cleaner. Plus me being so low will help keep it off of curbs a bit when I forget what the hell I'm driving...lol If I ever get around to ordering my fmhe and pump that is...
12138_1101470396435_1816953496_212060_7580032_n.jpg


40060_1266496321980_1816953496_525194_3726251_n.jpg


46094_1266483161651_1816953496_525150_434749_n.jpg
 
And just get an angle grinder with the a 4" cutting wheel. Should take all of 2 minutes to cut that piece out.
 
Kejross said:
Hope he doesn't mind, but I stole these pics off a local car club friends facebook Shawn Larsen. And here's how he did his and how I will be doing mine... Makes it so you can put the plastic piece back on the bottom to help channel the air and just make it look cleaner. Plus me being so low will help keep it off of curbs a bit when I forget what the hell I'm driving...lol If I ever get around to ordering my fmhe and pump that is...
12138_1101470396435_1816953496_212060_7580032_n.jpg


40060_1266496321980_1816953496_525194_3726251_n.jpg


46094_1266483161651_1816953496_525150_434749_n.jpg
Click to expand...


That is exactly how i need to cut it. Can i rent an angle grinder?
 


Could buy a harbor freight one for like $20 and it will last about one use, or hit the pawn shops... I got a nice higher amperage Bosch for $40
 
Ooooo I am soo telling Shawn LOL, Im sure he won't care, he seems really helpful on the FB Club page.

Great way to do it tho, If &/or When I go intercooled this would be the way I would do it too :th_thumbsup-wink:
 
Found these pic of a guy who didnt cut his frame. Doesnt look like it will hit anything though. This is the same FMHE i have. The newer zzp one.

IMG00437-20110615-1920.jpg
IMG00436-20110615-1920.jpg
 
TLSheff said:
Ooooo I am soo telling Shawn LOL, Im sure he won't care, he seems really helpful on the FB Club page.

Great way to do it tho, If &/or When I go intercooled this would be the way I would do it too :th_thumbsup-wink:
Click to expand...

LOL He's a really great guy, you need to come up here to one of our meets and meet everyone. We are doing one saturday at 6pm, got 4 of us for sure coming, but you probably already know from the FB club page. Thats how I remembered the pics cause me and him were talking about it and what he did to mount it and junk. I have a S2 core but been dragging my feet on getting the FMHE and pump... Kinda debating between keeping the charge cooled with the IC, and keeping myself cool with the AC. I've been leaning towards fixing the AC so the IC will have to wait a bit longer.

GOTIT4CHEAP16 said:
Found these pic of a guy who didnt cut his frame. Doesnt look like it will hit anything though. This is the same FMHE i have. The newer zzp one.

IMG00437-20110615-1920.jpg
IMG00436-20110615-1920.jpg
Click to expand...

No you in no way shape or form have to cut it and most don't... It just hangs a bit lower and you can't get that plastic air dam piece back on is why people cut them to begin with. If you don't mind it hanging a bit low and leaving that piece off just bolt her up.
 
You must log in or register to reply here.
Back
Top