Think you can see me now? (Ideas Wanted Aswell)

[Street Wolf]

As if a 9,000 + pound Land Rover with 4300k HID's and 6 Hella 4,000's is'nt already easy enough to spot..... we've decided to brighten it up a little more.

UPS just delivered my roll of 3M Black reflective vinyl that I'm going to go get cut at the vinyl shop I work with all the time. Myself and a buddy of mine was planning on having this stuff cut into a pinstripe for each side becuase I had taken off the ugly gold pinstripe that was already on the Disco, but now that there is no pinstripe on I plan to leave it that way.

Any idea on what we can do with it? We're already considering running it along the length of the top indention on the side, or the lower indention but I wanted to see if any of you had any ideas.


Black Vinyl, regular light.

Pitch Black, No Extra Light.

Pitch Black, Camera Flash

Pitch Black, Flashlight Beam

 

[Street Wolf]

 

[BADAZGTP]

What about doing the Land Rover and Discovery badges in it and then Discovery on the bottom of each front door. Justa thought.

 

[justwhisen]

where did you get it?
use some as a windshield visor?

 

[02BlueGT]

Wrap the Bush Bumper (or whatever that thing on the front is called), and maybe something on the back as well

 

[DesQ27]

Gotta do something on the back so when people high beam you it backfires...haha

For real though I like the idea of the lettering at the base of the doors. Or if you could somehow outline parts of the windows, the contrast between reflection and tint could give you some added privacy.

Or something along the top or on the top so fellow off-roaders can see you coming up over a hill, or see you if you ever get stuck in something low like mud, or a valley.

 

[VinnieGTP]

Along the running boards or rocker panel area on each side?

 

[04CompG]

wrap the entire steel cargo basket on top as well as the ladder on the back. make sure you wrap the steel from the basket that overhangs on both sides of the vehicle. wrap the entire front grill too. buy some step rails for each side and wrap those. wrap the underwater kit and both bumpers. covering the plastic near the wheel wells on the fenders right above the tires is a must and dont forget the door handles on all sides. put the icing on the cake by covering every part of the front winch and the steel support rails I see below the front bumper.
you would look like a rolling machine coming down the street at night.