Slick2500
New member
Ofna Axles? For your Detonator?
The *Unofficial* GPF RC Thread
- Thread starter PurpleGuy
- Start date
Slick2500
New member
Been rather busy lately.
Hot Bodies D8T with M2C Electric conversion. | RC Talk Forum
slick2500s Ecx Torment 2wd | ECX Forum
Slicks Arrma Kraton 3s. | ARRMA RC Forum
And the current status of the Outcast.
M2C Racing chassis.
M2C Racing motor mount and center diff mount.
Rpm a arms with rear mud guards.
Hot Racing chassis braces.
Hot Racing complete gearbox cases.
Hot Racing suspension mounts.
Hot Racing rear brace and wing mount.
Voltage Hobbies shock towers.
Voltage Hobbies servo mount.
Voltage Hobbies ackerman plate.
Probodyrc.ru Unbreakable body.
Proline Shockwaves.
Tekno ET48.3 shocks with Tekno orange springs. I need the newer Arrma springs as these Teknos are struggling to hold up this heavy pig.
T-Bone Racing bumpers front and rear.
DS Servo DS3225.
Castle Creations Mamba Monster 2.
Hobbywing 4985 1650kv motor.
Mr.Duke custom fan mount with 2 Trackstar 30mm fans.
Hot Bodies D8T with M2C Electric conversion. | RC Talk Forum
slick2500s Ecx Torment 2wd | ECX Forum
Slicks Arrma Kraton 3s. | ARRMA RC Forum
And the current status of the Outcast.
M2C Racing chassis.
M2C Racing motor mount and center diff mount.
Rpm a arms with rear mud guards.
Hot Racing chassis braces.
Hot Racing complete gearbox cases.
Hot Racing suspension mounts.
Hot Racing rear brace and wing mount.
Voltage Hobbies shock towers.
Voltage Hobbies servo mount.
Voltage Hobbies ackerman plate.
Probodyrc.ru Unbreakable body.
Proline Shockwaves.
Tekno ET48.3 shocks with Tekno orange springs. I need the newer Arrma springs as these Teknos are struggling to hold up this heavy pig.
T-Bone Racing bumpers front and rear.
DS Servo DS3225.
Castle Creations Mamba Monster 2.
Hobbywing 4985 1650kv motor.
Mr.Duke custom fan mount with 2 Trackstar 30mm fans.
ItHurtz
Active member
I must not have done my updates.
The twin detonator I put some sticky tractor tires on, and although badass, it was like driving around with super sticky slicks. The grip was immense at half throttle and then a punch it would it would flip over, a blip of the throttle at stop and it flips over.
The boy bought a redcat racing volcano epx pro for his bday, this rips dam good for stock no need to go any faster. So I took his original nitro rcx bowie iron track and put the tractor tires on that, but it needs a axle and ya those are never in stock so poo. Detonator also needs a drive cup as the axle busted one with those sticky tires. The torment is still all stock with its 2 min 30 sec lasting stock lipo battery.
I need to find these tractor tires in a harder rubber and a tad wider and it would be a supreme badass tire!
67781818_444431523064941_2820426923597889536_n by Corey S, on Flickr
67236749_473929646739852_6122481485380321280_n by Corey S, on Flickr
67235471_397506154209633_4142001400097800192_n by Corey S, on Flickr
67376613_1318689654947504_2525470031660187648_n by Corey S, on Flickr
67294056_497617380973256_8400806643423510528_n by Corey S, on Flickr
67132576_3259480460788971_3638687935164841984_n by Corey S, on Flickr
My current crew with the only one road worthy but not worth it for 2min drive time on the left lol. Even the volcano is out with a snapped axle and bent shock lol.
75271553_939671916401944_8668662008255610880_n by Corey S, on Flickr
The twin detonator I put some sticky tractor tires on, and although badass, it was like driving around with super sticky slicks. The grip was immense at half throttle and then a punch it would it would flip over, a blip of the throttle at stop and it flips over.
The boy bought a redcat racing volcano epx pro for his bday, this rips dam good for stock no need to go any faster. So I took his original nitro rcx bowie iron track and put the tractor tires on that, but it needs a axle and ya those are never in stock so poo. Detonator also needs a drive cup as the axle busted one with those sticky tires. The torment is still all stock with its 2 min 30 sec lasting stock lipo battery.
I need to find these tractor tires in a harder rubber and a tad wider and it would be a supreme badass tire!
67781818_444431523064941_2820426923597889536_n by Corey S, on Flickr67236749_473929646739852_6122481485380321280_n by Corey S, on Flickr67235471_397506154209633_4142001400097800192_n by Corey S, on Flickr67376613_1318689654947504_2525470031660187648_n by Corey S, on Flickr67294056_497617380973256_8400806643423510528_n by Corey S, on Flickr67132576_3259480460788971_3638687935164841984_n by Corey S, on FlickrMy current crew with the only one road worthy but not worth it for 2min drive time on the left lol. Even the volcano is out with a snapped axle and bent shock lol.
75271553_939671916401944_8668662008255610880_n by Corey S, on FlickrGingershrek
New member
Man. I wish I didn’t find this part of the forum! I have a 4x4 slash, velineon system, can only run 2s max at the local track, and a 5b. Both are in storage at my parents house. The slash is pretty much stock, the 5b though, that thing was a money pit when I was bashing. As of now it has a tr transmission, Stock motor with a 2 mil crank, stock carb, hitec metal gear steering servo, hpi slipper, hostile Mx rear tires and wheels, OEM front tires and wheels, aluminum towers, rpm front and rear arms, ddm pipe for bashing, can’t remember the pipe for the long track runs, but it’s a silenced top end pipe, fan cover brace, k&n air filter, pantyhose prefilter (you read that right).
It’s been about 5 years since I’ve had either one out, I’ll have to dig them out for some pics. If I can get the video off of photobuck, it’s of the 5b jumping my tundra about three days after I bought said tundra brand new (bad decisions were made). I actually had a neighbor complain and call the police when I ran it with my ddm pipe at about 4pm, he had a “heart condition” and it’s disturbing his sleep. Such a prick, he was always whining about something, rc cars, dirt bike on the road, 2am burnouts. Ridiculous. Lmao!
Sent from my iPhone using Tapatalk
It’s been about 5 years since I’ve had either one out, I’ll have to dig them out for some pics. If I can get the video off of photobuck, it’s of the 5b jumping my tundra about three days after I bought said tundra brand new (bad decisions were made). I actually had a neighbor complain and call the police when I ran it with my ddm pipe at about 4pm, he had a “heart condition” and it’s disturbing his sleep. Such a prick, he was always whining about something, rc cars, dirt bike on the road, 2am burnouts. Ridiculous. Lmao!
Sent from my iPhone using Tapatalk
Gingershrek
New member
Lol. Don’t live there anymore. I’ll have to go grab them. Probably beginning of summer. I did dig up some pics from my photobucket.
Sent from my iPhone using Tapatalk
Slick2500
New member
I found axles for your Bowie, remember Himoto is the OEM of that truck Himoto Bowie F/R Universal Shaft 2P HI/33604
Painted up yet another body. J Concepts 82 Chevy C10 Spaz Stix Gold/Orange/Green/Purple.
Also picked up this for my nephew.
Painted up yet another body. J Concepts 82 Chevy C10 Spaz Stix Gold/Orange/Green/Purple.
Also picked up this for my nephew.
Attachments
Last edited:
Slick2500
New member
Right?
Picked up this guy for running around in the house.
And of course I couldn't just leave it stock.
Hot Racing brass diff covers front and rear.
Hot Racing brass wheel weights front and rear.
Hot Racing brass front steering knuckles.
And Hot Racing shocks front and rear.
Last edited:
ItHurtz
Active member
Bowie lost another axle, then the daughter broke some things, acting up so I junked it. Stripped it of parts and gave it to the boy to tear down and learn how things work.
He broke the redcat. needs a diff, axle and chassis.
My tamiya needs a tie rod end. Dam toys
Neighbor gave the boy a old traxxas rustler though, transmitter worked, nothing from the reciever, and the msc had a wire broke off so I took the bowie guts I had and put them on the ruster. Thing rips pretty good for basically stock.
He broke the redcat. needs a diff, axle and chassis.
My tamiya needs a tie rod end. Dam toys
Neighbor gave the boy a old traxxas rustler though, transmitter worked, nothing from the reciever, and the msc had a wire broke off so I took the bowie guts I had and put them on the ruster. Thing rips pretty good for basically stock.
Scottydoggs
Killa Bee
i tell you what. i get another rc car or truck its going to be 1/5 th scale and a gas 30 cc engine. its a weed whacker engine pretty much lol
ItHurtz
Active member
**** this tamiya, broke drive cup, fixed it, broke it again and snapped a screw in half. I think I am just going to demod these dam motors, put something slower on and monster truck tires, I havent had fun with this thing in 5 years. Ecx torment can probably get one set of the motors and have fun with that.
Slick2500
New member
Buy something that isn't super old, uses dated materials and is long discontinued.
These modern rcs will run circles around those old timey cars and keep coming back for more.
No matter what you buy it is going to require some sort of upgrades. If you want something that won't break the bank or require a ton of upgrades check out the Hobao Hyper lineup.
These modern rcs will run circles around those old timey cars and keep coming back for more.
No matter what you buy it is going to require some sort of upgrades. If you want something that won't break the bank or require a ton of upgrades check out the Hobao Hyper lineup.
Last edited:
ItHurtz
Active member
Dated yes, but still badass! The bowie hardened cup I have needs to be shaved a few hundreths and it w ill fit! I fixed the screw and I will hook the programmer back up to the esc's and dial down that initial throttle so its not so dam stupid. ANd I will put 6"tx4"w monster truck tires on it when the time comes.
For now I took one of the lipos out, soldered a new plug on the ecx torment and drove for over 30min non stop today. Havent done that in years. Brushless and metal gears for the ecx and I think I will be golden. Things need to open up so I can try to fl y my plane at a park.
For now I took one of the lipos out, soldered a new plug on the ecx torment and drove for over 30min non stop today. Havent done that in years. Brushless and metal gears for the ecx and I think I will be golden. Things need to open up so I can try to fl y my plane at a park.
ItHurtz
Active member
L to R. 3yo pos $30 rc, daughters new 2wd brushed stampede, twin detonator with a missing wheel and 20' range ruckus, new kyosho mad crusher nitro just finished breaking it in carrying my airplane, boys redcat still broken and the ecx torment. woo.
I detuned the tamiya waiting for a wheel axle cup to come in and get to try out the new tune and see how it goes.
109391497_978334465972984_5087311737996600060_n by Corey S, on Flickr
I detuned the tamiya waiting for a wheel axle cup to come in and get to try out the new tune and see how it goes.
109391497_978334465972984_5087311737996600060_n by Corey S, on Flickr