• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

The *Unofficial* GPF RC Thread



ItHurtz said:
bowie iron track i believe
Click to expand...

This truck right?

FCES03001T1_a9


Horizon Hobby distributes that under the Force RC Outbreak 4x4. 1/10 Outbreak 4WD Monster Truck RTR: Red | HorizonHobby

Front/Rear CV Set (2): 1/10 4wd All | HorizonHobby
 


ItHurtz said:
so exceed and mav, or exceed is maverick now?
Click to expand...
Actually the OEM is HSP for Exceed Maverick and Redcat Racing. All 4 sell the exact same car with different colors and graphics on the body and different electronics.

HSP 94107TOP
2011819151711974.jpg


Exceed Sunfire
51C802-PRO-StormYellow-24Ghz-12.jpg




Redcat Racing Tornado
75373__50750.1516381474.jpg


Maverick Racing Strada XB this uses a slightly different chassis top plate and the chassis layout is reversed.
mv12613-da68.jpg





Also my "Interco Super Swampers" came in today. Those aluminum beadlocks have a lot more weight to them than I thought they would.

uKuRkPbl.jpg
 
Last edited:
Slick I found a LRP brushless sensor system in my closet I bought 4 years ago but couldnt get to work and seeing online it needs a 6 prong wire going from motor to esc that I never had. I am waiting on LRP response but I would assume thats why the setup never worked because I never had this wire?
 
ItHurtz said:
Slick I found a LRP brushless sensor system in my closet I bought 4 years ago but couldnt get to work and seeing online it needs a 6 prong wire going from motor to esc that I never had. I am waiting on LRP response but I would assume thats why the setup never worked because I never had this wire?
Click to expand...

To be honest idk, and I wouldn't hold my breath to LRP getting back to you anytime soon. LRP gone - R/C Tech Forums
 


ItHurtz said:
LMAO are you fcking kidding me?!?!??!?! Ugh aint that my lovely life luck
Click to expand...
Are you using a modern 2.4ghz radio? I had a brushless system that no matter what I tried it would not work with my old school fishing pole antenna radio, all I got was a blinking light when I turned it on, it worked just fine with all my other radios.
What did it do the last time you tried it?
 
The twin det I am still using the og radio, AM radio.

Boys has a 2.4ghz I could try that for giggles. I dont remember what It did, light kept flashing or something
 
ItHurtz said:
The twin det I am still using the og radio, AM radio.

Boys has a 2.4ghz I could try that for giggles. I dont remember what It did, light kept flashing or something
Click to expand...
Give it a shot with a 2.4ghz radio.


And nice Back To The Future Delorean.
 
Last edited:


This is the lrp super spin setup, I tried messing with it today on the boys 2.4ghz and its the same thing. I can get a green light, flashing red, flashing yellow,, flashing yellow by pushing the button but nothing activates the motor.
20180217_195409 by Corey S, on Flickr

Also messed with the turnigy brushless before I mount it, seems no load I can WOT for 3 seconds before it reduces to half speed and the blue light flashes. I can let go of throttle go wot again and the light is still flashing but I get 3 seconds again before half speed. Is this some kind of no load protection? It warms the can up pretty fast messing with it with no load. This is why I hate modding rc's and cars, its NEVER just a drop in and go when you want more power.

Oh and the esc plug has a lip on it so it wont fit into the tuner unless I snip that off. always something.
 
HK site says esc is 7.2v, but the box says 8.4max, and online people are saying the esc ISNT designed for higher than 7.2, maybe thats the blue flashing light, over load.....
 
Figured it out, end points were off, recalibrated it my way and no more flashing blue lights. Both motors are tuned and calibrated now. Installed the front motor so its back to 2wd now until I figure out where to mount everything and go from there.
 
You must log in or register to reply here.
Back
Top