• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

The *Unofficial* GPF RC Thread

cool, mud rules lol


the trick to driving it, at least its what worked for me, you need to put your head in the car, aka like your in it and steering it. cause when its coming back at ya, oh boy, confusion sets in and crash lol

its when you dont have to think about driving it any more that it becomes real fun.
 


ScottyDoggs said:
cool, mud rules lol


the trick to driving it, at least its what worked for me, you need to put your head in the car, aka like your in it and steering it. cause when its coming back at ya, oh boy, confusion sets in and crash lol

its when you dont have to think about driving it any more that it becomes real fun.
Click to expand...
My main deal was trying to get it not spin cookies on the pavement lol.
 
Eek, 9 hours. Wow, an aftermarket charger and battery with higher capacity will typically charge in 1 hour. A123's I charge in 15 minutes.

Jeff
 


That should work much better for you. What capacity battery do you have? Something about 4,500 mah will run for a long time probably 20 minutes or more. Should be able to find some pretty cheap. Last time I bought some 4500 Duratrax from Tower hobbies for about $20.

Edit: never mind won't fit 1/18th.
 
Car came with a 900 mah battery. The largest battery that will fit in that car is a Dynamite 1471 1750 mah and they are ~$26 or I can get a Dynamite 1473 1200 mah for ~$18
 
Just been looking into getting my own nitro truck. This isn't helping me hold off lol. Do you guys have any suggestions for a lower priced nitro? Don't want to spend to much on my first one. I currently have a nitro plane and have had many electric cars and quads so I'm not a total noob.
 
Broke my first part today =(
Hit a pot hole and it sumersaulted a good 5-6 feet.
a056841c27354f6f3397cf3915487478.jpg


Sent from A Galaxy Far Far Away
 


get used to that crap lol if the plastic dint break you can push the U joint back in there, unless its gone lol

wow edit: just noticed the metal stem sitting there , yup, busted it lol
 
china???? ive ripped the dog bones apart but never broke the u joint stem off. always was able to put them back together, a little tape wrapped around the bone ends held them from spreading open and coming apart.
 
I hate to say I told you, but.... order extra parts. I changed out my dogbones and axles to HPI on my Rustler because even putting a metal sleeve on the outer axle it still broke I still break them I had one dogbone that was twisted in half from launching too hard too many times. Take stock of what your truck uses and order extra A-arms and the hardware, axles all the way around and anything else driveline related.

Some of those little U-joints have a pin pressed through one end so you may get lucky and be able to drive it out and then put another pin in it. Even if it's only a nail, it should hold you until you get the parts in.

Jeff
 


Get extra shafts if you can, they bend. Go for the largest battery you can afford and is compatible with your charger. If you could go Lipo then it would drop the pack weight by over half and run time will be increased. The problem is you have to have a Lipo cutoff or warning.

Jeff
 
You must log in or register to reply here.
Back
Top