• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

the stock supercharger belt will work on a 3.4 setup right?



well...there may be enough travel in the tensioner for the 3.4" pulley however it may not be tight and i'd highly recommend a different belt for a 3.4" pulley to prevent any slippage and for best performance. That's what i did (4060660) that is the size for a serpentine belt.
 


GTPJOE90 said:
do you really notice alot more power with the 3.4? yes i have supporting mods
Click to expand...

It's definitely a boost in power that is easily felt. What made me notice it is being able to stomp on it at 35-40 mph and burn rubber with traction control ON (compared to like 15-25 stock). Also being able to chirp second gear is a good sign too. I can't really say much about it, because the day i took delivery of my car it wasn't licensed and i mashed it once, it was stock then. By the end of that night i had put on my 4" FWI, plugs, and TB spacer. And in another week i had the DP on, t-stat, and 3.4 setup. The 3.4 setup, when modded correctly with 0* KR, like my setup, is a night and day comparison to a stock vehicle.

Also , pizzi22 is correct. It will work, but i also made the switch to a tighter belt. If you want to use your stock one and don't want to fork over the cash, buy an oversized tensioner.
 
You need a tighter belt to make sure it won't slip. I'd also replace the tensioner pulley with a 3.5" pulley too (verses the stock 3.0")...
 
i dont want to mod any other pulleys except my 3.4 blower pulley what belt do u guys recoomend thanks i get 1 for free from autozone "rewards 20 dollar credit" lol if you have a part number id appreciate it thanks.
 
GTPJOE90 said:
i dont want to mod any other pulleys except my 3.4 blower pulley what belt do u guys recoomend thanks i get 1 for free from autozone "rewards 20 dollar credit" lol if you have a part number id appreciate it thanks.
Click to expand...

The tensioner pulley is the easiest pulley ever to remove/install, its a bolt, if that's why you don't want to do it.
 
Get the Gatorback belt from autozone. 4060660. that is the belt size. it's 66". it's for a 3.4" pulley
 




You must log in or register to reply here.
Back
Top