• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Test BillBoost

BillBoost37

BillBoost37

New member
That's right guys.. doing up the Test Your Knowledge thread got me thinking. Let's have you guys stump me.

Take a picture of a part/bolt from the car and post it. As me torque specs (drivetrain, not interior parts) and oddball stuff.

ex: What size bolts hold down the front seats in a W body?
Or: Name this part
P1010702.jpg


Day in and out you guys ask questions and many of us answer without consulting books or looking stuff up. See if you can stuff us.. Well..those of us that choose to take the challenge. Boost is in.
 


Little tough to tell how many pins. It's in the right location to be the connector in a 97/98 era for the ABS extension wiring connector out to the wheel hub. But there are one or two other connections right there too.
 
Ok, the ambient temp sensor that would usually be screwed up in front of the radiator. Must be folded back onto itself to be in that location. About the same size and two pin. Good one. :th_thumbsup-wink:
 
Is that a connector that just dangles not plugged into anything? Cause I found one like that in the same location on my 00 impala. Only explanation I could think of was maybe a carryover from an older alternator, since it's right there. Also that connector was gone in my 04 Impala. I'm betting it was done in a pinch by GM. Why change the whole harness is the reasoning.

Bill, I win because I already stumped you with my torque thread :th_winking:
 


T0pwater said:
Is that a connector that just dangles not plugged into anything? Cause I found one like that in the same location on my 00 impala. Only explanation I could think of was maybe a carryover from an older alternator, since it's right there. Also that connector was gone in my 04 Impala. I'm betting it was done in a pinch by GM. Why change the whole harness is the reasoning.

Bill, I win because I already stumped you with my torque thread :th_winking:
Click to expand...

yes it just dangles there.
 
I see the map light and other assorted console lids and doors, panel under the steering column. And you making the biggest mistake of your life by painting them. :th_laugh-lol3:
 




BillBoost37 said:
There's no winning really. I'm still learning stuff, as I will until I die. :th_thumbsup-wink: Keep them coming.
Click to expand...
Could you maybe teach a class on how to use the internet? Actually maybe just how to be a human being. I think I can attribute 75% of my problems at my job to people not having this mentality. With most people Ego > Truth in my experience
 
From this angle, and it's not that parts best side...lemme tell you. And no sizing reference.....

It kinda looks like a burnt out exhasust crossover donut. It's too perfectly round in shape to have been a beat to hell exhaust rubber o-ring. Looks to big to be any other o-rings.
 
You must log in or register to reply here.
Back
Top