• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

TDCRACING's Ride's (PICS!!!)

  • Thread starter Thread starter TDCRacing
  • Start date Start date


Im here for ya dude...just let me know what u need and we will make it happen.
 
Oh i wont.... If you need help putting it in manually....if you come down here i got 2 fellow gp'ers plus my self and you of coarse yourself to do the job...if i come up there me and you will get it done....


and if you talking just about pics or phone support i gotcha on that 2...i was assuming you were talking about good old manual labor!! :cool:
 


I wouldn't say cams are hard to install, they just take more time on a fwd car. Just remember to keep things clean and lubed. Also be extra carefull when removing and installing the cam as the cam lobes are very sharp and can easily scratch a cam bearing, or your fingers.
 
yeah good points...i plan on using assembly lube and all of the normal things that are needed to install a cam.
 
I am not sure if you will be following a write up but somemore of the problems I ran into are;

Unhook the steering knuckle,
Watch the trans shift cable (mine got really tight)
Watch the trans wireing harness (mine also got really tight)
 


Switched to zzp headers. Cam installed. New transmission installed. New drilled rotors and windows tinted. Along with a stage 4 FMHE and a 2.8.



61306af5.jpg


c293cec4.jpg



611df764.jpg
 


You must log in or register to reply here.
Back
Top