• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

TC off at start....is it possible?



abs saved my car once when i needed to make an emergency stop that involved steering thats why i dont wanna pull the fuse....i hate ABS in the winter time
 


Kolton Lock said:
I think my button is shot... It does NOTHING.
Click to expand...


maybe the bulb is out in the dash?

have you tried to spin the wheels in dirt or loose gravel? if so the low trac light comes on, then click the button, and try again, if low trac comes up again you have a issue. like a bad connection. maybe like the plug on the switch.
 
I can tell you my bulb isn't out cause the low Trac will come on when spinning wheels. But no matter what I do, short of pulling the fuse, I cannot get the Trac off light to come on via the button
 




Bronco Boy said:
You better re-read that. You have to solder two wires to the circuit board, which come from a relay that you have to wire.
Click to expand...

see i knew i couldnt be that simple, if i get my car dyno tuned for other mods could they tune the car to have the button off at start
 
Yeah, guess pulling out the fuse too...or soldering two wires is too much work.

But who am I to judge, right?
 
You must log in or register to reply here.
Back
Top