• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

taking out headlights, corners, taillights

rambo33

rambo33

New member
can someone tell me what screws need taken out to remove the headlights corners and tailights. if you could...take pictures and circle the screws? im planning on restoring the headlights clearing the corners and tinting the tails this weekend but im clueless about what to unscrew to get em out
 


For the headlights all you need to do is remove the two 10mm hex-head screws. The corner-light unscrews from the headlight via a philips-head screw.

The tail lights come out with the plastic screws in your trunk. It's simple for all of this, you won't need pics.
 
To take out the headlights, remove the 2 bolts on top of each headlight then push the assembly away from the center of the car to pop the headlight out of the tab in the back and then slide it out. For the tails, theres two plastic nuts on each side. Twist those off then pull back the carpet to get at the 3rd nut and pull the assembly out.
P.S. sorry I don't have any pics but you should be able to figure it out no problem so I dont think youll need them
 
There's two bolts for each set of headlights, I've yet to take the tails off but I'm sure it's the same idea. But if you still need pics I can get some tomorrow.
 
thanks for the help everyone. no need for any pictures. i already cleared the headlights just need to figure out what to use to seal em back up lol
 


You must log in or register to reply here.
Back
Top