• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Supercharger pulley came off

xxburkettxx07

xxburkettxx07

New member
98gtp was driving yesterday gave it some, gas next thing I know I hear a few clunks n lost boost n most of power...look under hood the supercharger pulley is gone, and only the shaft appears to be fine.. anyone ever had the pulley come off the shaft...it was a rebuilt snout with a3.4 pulley all bought from zzp and they pressed the pulley on the snout last year..

Sent from my SAMSUNG-SM-G870A using Tapatalk
 


being ive used a sc pulley puller, id say thats almost impossible. id be calling zzp and asking them wtf?

pics of the carnage? you find the pulley?
 
No couldn't find pulley...I press hub and bearings daily at work press on **** shouldn't just come off a year later

Sent from my SAMSUNG-SM-G870A using Tapatalk
 
e06e356d5135bf9db1c9ee5bb17fd146.jpg


Sent from my SAMSUNG-SM-G870A using Tapatalk
 
Mind blowing wtf would cause that it's been a year almost exactly now..it spins freely n when I give the car a lil gas it spins...it was noisy as hell tho..car is nice n quite now. Could I need new rotor needle bearings? When I spin the shaft it feels smooth n play at all..n it had new coupler Could the needle bearings be the reason it was so noisy?? Are they hard to replace

Sent from my SAMSUNG-SM-G870A using Tapatalk
 


look under the engine a top the splash shield for the pulley, near the motor mount. if its not down there look again back where it popped off. it maybe cracked. the outer bolt is also gone.
 
I just gonna get a modular set up 3.4, but what about this bolt missing send me a pic what it should look like and installed if possible

Sent from my SAMSUNG-SM-G870A using Tapatalk
 


So what about the needle bearings can they cause it to be noisy are they easy to replace?

Sent from my SAMSUNG-SM-G870A using Tapatalk
 
xxburkettxx07 said:
So what about the needle bearings can they cause it to be noisy are they easy to replace?

Sent from my SAMSUNG-SM-G870A using Tapatalk
Click to expand...

the needle bearings can make noise but most of the time you will get resistants in the rotors when spinning, to replace you have to take off the front drive pull the rotors, tap and insert grease fitting so you can press out the old bearings, although at this point I would be interested to see if you have any play in the rotors and how the inside of the case looks

xxburkettxx07 said:
Anyone got an extra bolt for the snout

Sent from my SAMSUNG-SM-G870A using Tapatalk
Click to expand...

I think I have one laying around
 
if the sc is making sounds now, its broken. either the coupler or bearings. bearings are not so easy to just change.

hand turn the sc see if you hear any thing.

most wont have a extra bolt. jy time or dealership.
 


It don't make any sounds right now it's dead silent lol jk but when I spin it by hand no resistance it spins as it should n extra play or anything

Sent from my SAMSUNG-SM-G870A using Tapatalk
 
You must log in or register to reply here.
Back
Top