M
Max Cook
Guest
Ill Ship stuff now. Everything you see below is the price not including shipping. If you pick it up ill give you $15% off the list price. Located in Grand Rapids Michigan.
XP Cam $SOLD- I don't know how many miles it has. I put about 20-30k on it. I bought it used from Andrew. It worked fine when I pulled it. I just needed to replace the timing chain/dampener so I used it as an excuse to also switch to an NIC cam (I always preferred an NIC anyway). It does have expected wear, however it should all be cosmetic. It should be fine. I am told picky people could have it polished without damaging the cam.
Engine Pro 6.95 5/16 Pushrods $SOLD- 20-30k miles These are from Napa. They were used with the XP cam in my car. You'll probably want these if you run that cam. Not going to guarantee that this will be the size in your build but it was for mine.
3.0 Black ZZP MPS Pulley $25- Some scratches, works fine.
Stock Rockers $15- 75k miles. These were originally on the spare heads I ported. That's about all I can say.
ICM $20- 120k miles. Was on my car and when I was having issues with my car it was one thing I wanted to try swapping to see if it helped. Replacing it did not change anything at the time, so as far as I know this works totally fine.
Cruise Control Module $25- 120k miles. Was on my car and my cruise stopped working and it wasn't the fuse so I bought another module on gpf and swapped it. However, my cruise still doesn't work, so its probably fine. If it isn't I will refund you.
Single Din Pioneer Deck $45- Has USB, and AUX input on the front. Works with IPODs. Can get the model number later. Worked great, sounded really good. I have the mounting kit as well. I replaced it because I moved up to a double din unit.
1 18" MB Drifter Black Rim with brand new Cooper 245 tire $85- This one is a LONG shot but I have one of these rims with a brand new tire on it. At one point my car was in an accident and hopped a curb (shortly after getting new tires and rims). In the accident I lost 3 tires and 3 rims. This rim and tire was however completely untouched. However, they stopped making that rim, and the tire too.... So it has been sitting in my garage for a few years. Perhaps someone out there is looking for one more to complete their set of these. They are REALLY nice rims and I really wish they hadn't stopped making them.
Contact me via PM please to work out anything. Thanks.
Disclaimer: Please remember these are used parts unless otherwise stated. I have listed and described them as accurately as possible, but I cannot guarantee how they will work for you as they are used parts. I do not foresee these parts I have listed working out less than expected but I cannot guarantee it. Thanks.
XP Cam $SOLD- I don't know how many miles it has. I put about 20-30k on it. I bought it used from Andrew. It worked fine when I pulled it. I just needed to replace the timing chain/dampener so I used it as an excuse to also switch to an NIC cam (I always preferred an NIC anyway). It does have expected wear, however it should all be cosmetic. It should be fine. I am told picky people could have it polished without damaging the cam.
Engine Pro 6.95 5/16 Pushrods $SOLD- 20-30k miles These are from Napa. They were used with the XP cam in my car. You'll probably want these if you run that cam. Not going to guarantee that this will be the size in your build but it was for mine.
3.0 Black ZZP MPS Pulley $25- Some scratches, works fine.
Stock Rockers $15- 75k miles. These were originally on the spare heads I ported. That's about all I can say.
ICM $20- 120k miles. Was on my car and when I was having issues with my car it was one thing I wanted to try swapping to see if it helped. Replacing it did not change anything at the time, so as far as I know this works totally fine.
Cruise Control Module $25- 120k miles. Was on my car and my cruise stopped working and it wasn't the fuse so I bought another module on gpf and swapped it. However, my cruise still doesn't work, so its probably fine. If it isn't I will refund you.
Single Din Pioneer Deck $45- Has USB, and AUX input on the front. Works with IPODs. Can get the model number later. Worked great, sounded really good. I have the mounting kit as well. I replaced it because I moved up to a double din unit.
1 18" MB Drifter Black Rim with brand new Cooper 245 tire $85- This one is a LONG shot but I have one of these rims with a brand new tire on it. At one point my car was in an accident and hopped a curb (shortly after getting new tires and rims). In the accident I lost 3 tires and 3 rims. This rim and tire was however completely untouched. However, they stopped making that rim, and the tire too.... So it has been sitting in my garage for a few years. Perhaps someone out there is looking for one more to complete their set of these. They are REALLY nice rims and I really wish they hadn't stopped making them.
Contact me via PM please to work out anything. Thanks.
Disclaimer: Please remember these are used parts unless otherwise stated. I have listed and described them as accurately as possible, but I cannot guarantee how they will work for you as they are used parts. I do not foresee these parts I have listed working out less than expected but I cannot guarantee it. Thanks.
Last edited:
