• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

still got a problem

I

idriveamazda

New member
ok now i just fixed the IAC and the car is dying when i put it in gear and it still wants to idle high. what might be the problem i need to fix it so i can get to work!!! any help will be appreciated!!!!
 


idriveamazda said:
ok now i just fixed the IAC and the car is dying when i put it in gear and it still wants to idle high. what might be the problem i need to fix it so i can get to work!!! any help will be appreciated!!!!
Click to expand...


Did you disconnect the battery when you were installing the IAC? To let the PCM clear and relearn everything?

Also, try to unplug the MAF and see if it idles better.
 
no i didnt unplug the batt. but i will. it idles fine now the problem is that when i put it inn drive it dies. does that mean that the neutral safety switch is bad?/
 
idriveamazda said:
no i didnt unplug the batt. but i will. it idles fine now the problem is that when i put it inn drive it dies. does that mean that the neutral safety switch is bad?/
Click to expand...


Most likely not a Neutral Safety Switch. This shouldn't have anything to do with the car stalling. Try disconnecting the MAF sensor.
 
You must log in or register to reply here.
Back
Top