• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Still getting knock with 3.8 pulley and exhaust mods...

Status
Not open for further replies.

97AutoXVette

New member
Hey Guys, will be posting this in the PCM Tuning section but wanted to ask it here as well...

Recently installed PLOG and ZZP 3" Catless DP on my 1999 GTP. There are no vaccuum leaks or anything like that and I replaced all the vac/boost lines to be sure. I have a lower temp T-Stat and the stock 3.8" supercharger pulley. Did some data logging yesterday and I am still seeing ~2 to 3 degrees of KR at WOT at different places in the RPM range. Anyone know why this is the case? Have you seen this regularly on stock GTPs with exhaust mods?? Figured I would have 0 KR after those mods without running more boost...
 


Status
Not open for further replies.
Back
Top