Steering Wheel Removal & Installation
- Thread starter $03gp/gt$
- Start date
BackInBlack
New member
The short version:
1) Disable SiR system
2) Unscrew back of wheel with torx driver
3) Remove airbag inflator
3b) Do NOT spin the SiR coil!
4) Disconnect radio controls
5) Use wheel puller to remove wheel
1) Disable SiR system
2) Unscrew back of wheel with torx driver
3) Remove airbag inflator
3b) Do NOT spin the SiR coil!
4) Disconnect radio controls
5) Use wheel puller to remove wheel
BackInBlack
New member
SIR = Supplemental Inflatable Restraint.
The coil is a clockspring of flex wire that connects the airbag and steering controls to the car, and allows the wheel to spin. If you move it, it could likely be damaged after assembly when you turn the wheel. Worst case scenario, the airbag goes off in your face. Best case, you lose your horn, wheel buttons and airbag, which will require you to replace the coil assembly. It looks like an old 8mm film reel. (The old blue & white ones.)
The coil is a clockspring of flex wire that connects the airbag and steering controls to the car, and allows the wheel to spin. If you move it, it could likely be damaged after assembly when you turn the wheel. Worst case scenario, the airbag goes off in your face. Best case, you lose your horn, wheel buttons and airbag, which will require you to replace the coil assembly. It looks like an old 8mm film reel. (The old blue & white ones.)