• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

SS M90 misfiring due to tune?

With my Intense PCM, my STFT is -0.7 to 4.6 at idle. My LTFT is 12.5 at idle. I'm contemplating just biting the bullet ad getting HP tuners and learn it myself. This is so frustrating.
 


You'd also want to invest in a wideband.

Although arent you trying to sell one?

Either way. Those tunes are wrong or you have mechanical issues.

STFT's dont mean much. Pay attention to the LTFT's.
 
matt5112 said:
You'd also want to invest in a wideband.

Although arent you trying to sell one?

Either way. Those tunes are wrong or you have mechanical issues.

STFT's dont mean much. Pay attention to the LTFT's.
Click to expand...

Yea maybe I'll just keep it. I don't have a spot left in my gauge cluster though. Need to find a place to mount it.
 
MAF table could be off by that much too.....I've seen it that way. But even with the Intense pcm, it suggests something isn't right.

Kinda off the wall, but have you checked the O2 sensors? If it's going bad, it can throw a tune off also.
 
Reptile said:
MAF table could be off by that much too.....I've seen it that way. But even with the Intense pcm, it suggests something isn't right.

Kinda off the wall, but have you checked the O2 sensors? If it's going bad, it can throw a tune off also.
Click to expand...

Hmmmm. I'll have to look into the O2 sensors. Reptile, where is your shop?
 


my LTFT's were all around 12 all the time.

Even with no vac leaks, exhaust leaks, brand new O2.

Tune was off since it was tuned with an exhaust leak first time around.
 
Well sure, it can, and it should, but I've seen where they won't throw a code. It mostly does it when it doesn't "switch" like it should. What I was getting at, is that I've seen an O2 sensor make a difference of +- 8 just by switching. Denso, Delco, they seem to read different.

But then again, I've seen stock tune cars, factory everything go +12 on a scan.
 
You must log in or register to reply here.
Back
Top