• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Spherical bearing upper mounts

Atm I'm running 10" 450 up front, 12" 350 in the rear. I was planning on switching out the fronts for a 350-400 and figured I can just reuse the springs for the rear and that's one less thing I have to buy. A 12" should work out fine for the front and I can get rid of the helpers up front too. I'll probably go with a 275-300 12" in the rear.
 


There was some talk on the original DIY coilover thread on CGP that 12" springs in the front can bow in and make contact with the strut. I went with 10" springs way back when because of this.
 






well i didnt realise that was that small of a pic on the uploader....

here's a better one. plates/cups should be welded up here shortly for one set other than the TR's
20160224_072222_zpsikv1jz9j.jpg
 
I would be interested in a set of the plates that are the last picture on page 8. I would also be interested in the matching pair for the rear. What would you like to get for a set of these? Thanks
 
You must log in or register to reply here.
Back
Top