• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Speedo vid *YAY*

F

fst

New member
i dont belive a speedo vid is worth a 'kill' so i decided to post it in the L67 section(mods feel free to move it if it is considered under the racing/kill secrion):th_thumb-up:
another useless speedo vid since im bored:th_tongue2:
30-105mph
just a couple days ago. did a slow roll from a 30mph and spun a bit. this is with the 3.3" pulley and vs cam+blah blah supporting mods with 20* of timing and a bit of knock(less than 1*) in 3rd gear(approaching 100mph?). im still getting use to the 3.29 gears. looks comparable to some that are running 3.1 and 3.0 pulleys eh:p:th_scratchhead:?
 


hm..seems about as fast as my car is. id think with that cam you should be able to run a little faster. you still have your alky hooked up?
 
alky's still hooked up and turns on at ~6# and WAS set at ~13.25# for the max psi. i added a couple degrees, increased the AFC by +1 just in the 9K and lowered the max psi to 11.25# and will scan again as well as make another vid lol. if i can go from 40-100 in at least 8-9seconds with the 3.3"(currently 10secs) i'll be happy.
 
the first time i watched it, it seemed slow. the second time i counted the speed off as he went and it seemed pretty quick. idk
 
Looks good to me.

Did I hear you chirp 2nd gear?

Also, I believe you're running a Wideband, what are your numbers at WOT? What kinda alky mixture are you running? What size nozzle?
 


now that i watch it at home intently with sound i think youd probably outrun me. your car sounds nice.
 
You must log in or register to reply here.
Back
Top