• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

speed daddy headers



Go to napa for the band clamps.

Get the Copper RTV.

Some of the holes will be oblong, you might need to trim the rear side of the crossover pipe to get them to fit.

I suggest O2 bung being welded onto the crossover. Its better than beating the **** out of your car to get the primary O2 to fit.
 
matt5112 said:
Go to napa for the band clamps.

Get the Copper RTV.

Some of the holes will be oblong, you might need to trim the rear side of the crossover pipe to get them to fit.

I suggest O2 bung being welded onto the crossover. Its better than beating the **** out of your car to get the primary O2 to fit.
Click to expand...

I would just beat the tunnel a bit. Its free and takes like 5min. I bet you cant drive to the welding shop faster than that, or even weld one in at home that fast.
 


I never had to beat the car to fit my front o2 in. But then again they are ssacs. Which speed daddys are a rip off of ssacs so whatever. Anyway I'd suggest buying an o2 extension harness or you can create your own. I didn't and was face palming myself once you realize you need like two more inches.
 


You must log in or register to reply here.
Back
Top