• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Spark plug insulator cracks

K

Kensi

New member
2004 GTP compG 80K miles.

#3 spark plug has recurring issue with the insulator cracking. Replaced it twice now after about 1500 miles. Replaced all the plugs and no issue with them. What say ye experts?
 
Last edited:


What brand/type of plugs are you installing? Are you using an actual spark plug socket or just a normal one? Anything in the area that may be hitting the plug?
 
Insulator is not cracking on installation. Plugs are OEM. As I said, it takes awhile before the engine begins to miss. This plug is front and center on the engine, no issues with angle or access.
 
Insulator is not cracking on installation. Plugs are OEM. As I said, it takes awhile before the engine begins to miss. This plug is front and center as you look at the engine from the front of the car, no issues with angle or access. Crack appears and runs from the terminal down through the ribs of the ceramic insulator.
 


I'm going to suggest it's install error. Unless that part of the head is flexing so badly that it cracks the ceramic, but I'm sure you'd have far bigger problems then cracking plugs.
 
Or you could just be buying a bad batch of plugs. When you need to change out the #3 plug, swap it out with another (like #1 or #5) and put the purchased replacement in that cylinders place. See what happens.
 
You must log in or register to reply here.
Back
Top