Soon to be rebuilt SC

[Phyrstorm]

Just picked up a used SC off ebay for not much and I am going to be doing a rebuild on it. Need some info on coating the rotors and some rebuild tips.

I have the ability to powdercoat the rotors myself but need to know if I have to use a high temp coat and if so what the cure temps are like since I only have like a 500 degree oven to use.

Is there anything I really need to look out for when actually doing the rebuild? I have above an average mechanical ability.

Here is a link to the SC.
GM | SUPERCHARGER | M90 | 3800 | EATON GTP | NICE PIECE | eBay

 

[TheOtherNick]

Dont pay for it, that is not a gen III m90.

 

[TheOtherNick]

Thats a blower off a series I 3800 aka an m62

 

[Phyrstorm]

Well **** if the guy scammed me I'll have plenty of fun dealing with Paypal then.

 

[TheOtherNick]

I see he says its a relist because the guy before never paid for it, so maybe you should explain it to him that it is a m62 off a series 1 3800.

 

[Phyrstorm]

We shall see. Now I shall go facepalm myself for buying something on Ebay at 2AM.

 

[TheOtherNick]

I have a supercharger here that I can put some new case bearings in and port it for ya if your interested pm me.

 

[crbquist]

You can clearly tell from the pic that it is not an m90 and is an m62

 

[matt5112]

Someone who's new to this might not be able to clearly tell.

 

[Phyrstorm]

Well I should have seen it but it was 2am.