• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Some more top swap questions! Yay!

Both i believe the sd are 3" although it looks like it gets a little smalled towards the end so is it just a stock gasket i need and do i need to buy a new one or can you reuse the original?

Sent from my LG-D851 using Tapatalk
 


They are 3" pipe that reduces to a 2.5" flange most of them are measure it to make sure I don't have SD headers and yes you need a new gasket.

Sent from my SM-G920V using Tapatalk
 
Ahh ok cause i remembered you saying not to use the manifold gaskets so i went and bought some new felpro manifold gaskets but didnt even think about the dp gasket.

Sent from my LG-D851 using Tapatalk
 
Use the original metal manifold gaskets they are reusable and work the best Scotty talked me into it lol I got some from rock auto sealed up good

Sent from my SM-G920V using Tapatalk
 


Yea I did the same thing as you I bought felpro I had them on my plog setup had issues sealing so I bought some oem ones when I just put my slp headers on. I almost bought sd headers but I got a good deal on some slp headers you might want to change the single wall flex on the SD headers they are known to leak I did the same on my slp headers because they come with a single wall flex

Sent from my SM-G920V using Tapatalk
 


Well thats what i though but then everyone said it needed to have special bolts and such

Sent from my LG-D851 using Tapatalk
 
Yea the bolts are special good luck with the parts store they have the puller but not the bolts

Sent from my SM-G920V using Tapatalk
 
91e63eacd875a1aa244f6a1c89e14827.jpg


Here's mine I just dug out

Sent from my SM-G920V using Tapatalk
 
if you buy a puller, you still need to buy the special bolts. free rental, buy the bolts, rip that pos off return the puller.
 


So scotty can i just use a puller and then the bolts you gave me the specs for yesterday right?

Sent from my LG-D851 using Tapatalk
 
You must log in or register to reply here.
Back
Top