• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

some help in de??

Knightmare

Knightmare

New member
Hi, I have a 2000 GTP just replaced the heads...now it is throwing 3 codes...p0305, p0205, and p0101...apparantley, they all have something to do with vacuum, air, or injector....I've been trying everything that I know of...but I am not very knowledgeable when it comes to vehicles in general, would someone in the general area be able to help me diagnose/look into the problem and possibly fix it? I would be willing to travel an hour-2 hours. Thanks
 


I kinda caught onto the injector issue..just need to know if there is anything I can do to fix it without replacing the injector? thats why I figured I would ask for help...I know little to nothing about cars :)
 
um check the connector on it to make your its tight. it could be static, those are the only two things i could think of. or it might not be in place all the way but im sure it is. check for any fuel around that one
im sure you know the order but just in case, from the front of the car
246
blower
135
 
I checked the plug, it is tight, and check for fuel around the injector? would I see it without yanking the injector out? or does it need to be taken out to see the area where fuel would be?
 


could pull that injector and swap it with another one...(erase codes) If the misfire code moves to the cylinder you moved it to then you know the injector is bad.... if it stays the same check wiring. if you have a test light you can check to make sure the injectorb is getting power also...
 
You must log in or register to reply here.
Back
Top