• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Small miss or stutter at wot



Haven't had time to take sc belt off ,driving it runs fine I give it have throttle or more it sputters idels fine I can get up to speed fine but once I give it gas it cuts out no check engine light either
 
Double check your plug wires, make sure they're seated on the plug all the way. Make sure you feel that "click" on each one as you push it on. Pretty good chance your problem is with plugs and/or wires, they can be bad right out of the box, when you can scan for misfires, swap the misfiring cylinders plug for one that's not missing and see if it follows the plug. If not, swap the wire, that'll tell you which one is the culprit. Without that scanner you're shooting in the dark, though.
 
I mean scanning for misfires, you don't always get a P03XX code, I never did in my Regal that was missing like a bastard. I scanned each cylinder for misfires with my scanner, hopefully the one you got with the torque app can do that too.
 


you need to set up GM pids. that trheads walks you through that.

to unlock the bluetooth 0000 1234 one of those should unlock it.
 


I can pick up the bluetooth obd2 it will pair but will not connect think it's a bad scanner I'm gonna have them ship a new one
 


8adf258cc0f9ee57bf9e70e34da2f898.jpg
 
You must log in or register to reply here.
Back
Top