single wire connector

[gtpwes]

noob question just put engine back together after replacing both heads. I thought I had all wires connected. but as I was underneath changing oil theres a single wire connector sitting on frame. I was thinking cam or crank sensor but there both multie wires. please help I'm racing thee weather here. thanx

 

[Scottydoggs]

you broke the rear knock sensor wire, it was clipped tot he p/s pump, it broke when you removed the pump. you can splice it with solder, or buy a new one. iirc theres one for sale in the classified section here

 

[gtpwes]

But there a connector plug on end of wire like it plugs into something. Also the weather got bad so I haven't got under car could it be for anti lock brake. But if it is the knock sensor we're is that located at off block

 

[stealthee]

anti-lock is also multi wire.

 

[Scottydoggs]

well get under it and follow it then.

 

[Scottydoggs]

this is the knock sensor harness, see if the plug matches

 

[gtpwes]

That looks like I just don't see the where the sensor was I take it's up under on block. Thanks

 

[green97]

They are on each side of the block about center. Look like little round canisters and are screwed in vertically into sides of block. The rear one will be tough to see and get to because of the transmission.

 

[gtpwes]

Thanks when it clears up I'll jack up and see.