• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Simple Intake (pictures)



i just COMPLETELY finished my intake...ive had several different designs on it...but this one is final lol, its nowhere close to hitting anything now, and it runs smooth...i used 4 inch pvc though...and left it white hehe
 
coreygnar said:
EVERYONE WHO HAS DONE THIS MOD READ THIS
every once in a while you should pop the hood and make sure your intake is intact, i opened my hood the other day and my filter was about to fall off, the hose clamp had become loose. im sure most of you made this like nawarkk did with pvc, and the homedepot clamps, and i dont think this stuff is engine rated, it may become loose over time.
Click to expand...


I used a 3" coupler from siliconeintakes.com and I don't have any issues with the cone sagging or falling off. I did this a while ago, can't remember. Funny how I stumbled across the same cone as the author :)

I have an 04+. The coupler is short enough that it becomes very rigid once it's forced on between the MAF and TB. I used the Spectre adapter ring deal on the actual MAF. For the sensor I just drilled a smaller hole than the sensor itself and let the silicone fold around it once it was shoved in. No leaks. Anyways, very sturdy and no issues on my part. Hope that helps other 04+

Here's an image of my first iteration while I was waiting for the mail to bring the coupler...it had the saggy/falling off issue after just a week :(


2011-01-15153653.jpg
 
Last edited:
Hello my friends, just did litle mod of my own today, very proud and happy :D. Got everything needed for setup in the Menards store that is better home depot. Filter i have bought here: link to ebay. I Found it on forum somebody recomended and i fount its amazing deal. For 35 buks i got 2 awesome filters and 4 stikers :). I saved one for other car or as replacement. So all calculated my mod came to be $27.89 with filter!


Looks something like that:
 
Last edited:


now if you failed at a step, whats the worse possible thing that could happen? and how could you tell which step you failed at?
 
You can't really FAIL at making an intake..

You have a tube and a filter at the end of it..

What did you not do correctly?
 




You must log in or register to reply here.
Back
Top