• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

setting up new system

Status
Not open for further replies.
Slueth66

Slueth66

New member
So i want to power all 6 speakers that i replaced in my gp that were powered by the bose system? should i buy 2 amps to run all 6 speakers or run 4 speakers off the headunit and 2 from an amp? if i run all 6 speakers off 2 amps all my pre amp outputs are taken up and i was wondering how i would add a sub? Someone tell me which road will leave me the most satisfied :)
 


I just ran 4 infinity's off a alpine headunit when I ditched the bose. You don't need 6 speakers, i don't know what size the extra 2 in the back were but they were small. Look in from the trunk at the back speakers and you should be able to see them.
 
6 is overload, i remember i installed 6 infinity reference series speakers in my friends camaro ss and it was a bit much, but he loved it. You should do 2 components in the front with 3 way 6x9's in the rear with a 4 channel amp and call it a day.
 
the rears dont count as 2 speakers "technically", the one 4 inch is your highs and the 6x9 is your low pass bass, kinda like a componet set. there is no need to do that many speakers. Add some nice coax's or componets in the fronts, 6.5's if you want a lil more bass, then some nice 3 ways like the above stated and you you'll be just fine. Get a 4 channel and a mono, and a nice deck with 3 rca's with 4 volt preouts and you'll be good to go.
 


Status
Not open for further replies.
Back
Top