• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

SD Hood and Spoiler Added

tms8582

tms8582

New member
WP_0000498.jpg
 




gtpeddie said:
looks good man i also have the SD hood and wing, may i suggest clear corners?
Click to expand...

Had projectors for a while but they fell apart so went back to stock. New stock fogs and tails too. Running 8000 HID's in the heads and fogs. If you look in the back ground you can see my neighbors GTP in the street. It looks a lot like yours! He has SD hood and wing too. His is a F'in rocket running over 400 HP with intercoller, cam etc...
 
Last edited:


Thanks guys, I added the hood last spring and someone posted on this thread to bring it back up. We built the motor and converted to e85 this spring. Gotta fix the dreaded rockers this winter.

 
Just bolted it on. I think I did raise and adjust the fenders a little to line up better. The hood is thin and light and does vibrate a little over bumps but latches down tight.
 


i have trouble with mine, on the front of the hood, where you open it, it will bounce down there and i adjusted the bumpers, still doesnt make it better and two. the bolts up top at the corner of each side are like too small for the hood latch and also bounce around and you can hear it while driving so i might be doing some backyard fixes here soon..
 
Yeah that doesn't sound right at all. The hinge bolts should tighten up all the way down and the latch should hold the hood in place. There are two stops at the front left and right that need to be adjusted too. I'd think if those touch the hood there is no way it could bounce.
 
i mean like the screw is tight, it is just too small for the hood latch hole which makes it bounce around in the hole basically no matter how tight it is... it is like a 8 spline screw and you have to remove the lower windshield seal and cover to get a screw driver or socket in position to take it off.
 
You must log in or register to reply here.
Back
Top