• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

scc lowering springs and Kyb front strutts

jordanair14120

jordanair14120

New member
I have those on my front and it puts the car way too low to the ground for where i live it causes the frame to be scraped any ideas on how to help resolve that issue???????
 


It causes your frame to scrape what tires are you running.. I mean dont get me wrong I have the same setup and cant get up my drive unless I back in sideways but just driving around dont have a problem. Dont even have a problem with speed bumbs as long as I take it slow.
 
i have the stock in, i have the stock tires on it, but im shopping for aftermarket ones to see if that will help with a low profile tread???
 
Are these used parts? You have the anti-pogo washers? You replace the strut mounts when you had this installed? Mine are old and I don't bottom out, only if the angle is more then like 40* angle, but thats why I still have my trailer hitch.

by stock I assume 225/60/16?
I'm running 245/45/17's no probs with rubbing
 


I have them mounted on gas shocks and my stock are on quick strut for fast removal and easy installation I take a pic of them to show
 
this is why i havent bought lowering springs, i have new gr-2's with new mounts but i dont wanna lower it because you have to drive slow all the time lol i see all the lowered cars out there it doesnt look fun, but damn does it look good
 


Martin 04 said:
this is why i havent bought lowering springs, i have new gr-2's with new mounts but i dont wanna lower it because you have to drive slow all the time lol i see all the lowered cars out there it doesnt look fun, but damn does it look good
Click to expand...

i sure as hell never had any problems getting anywhere, including through a foot of snow.
 
how often are you scraping your frame? just avoid those roads :th_biggrin2: the car looks too good lowered!
 


Huge problem! i did my safty check that i do before road trips and just found out that my control arm is bent and i have to replace them time to order the ZZP racing control arms. So now i cant attend as soon as it gets fix i will attend a meet
 
nooo its fine just drive it :th_jester: if you didnt notice anything with how it drives then it fine!! haha
 
You must log in or register to reply here.
Back
Top