S1X idle setting

[Silver GTP]

I finished my S1X and Gen V install and the idle is not holding steady. I still have stock idle settings. The idle will start to fall off a little bit and then jump up to stop from stalling. It will only drop to low 700's rpm range and then jump up to a little over 800. This will hold steady for a few seconds until it slowly drops off again. Is this a side effect of an S1X at stock idle settings or do I need to hunt down a problem? It runs great other than at idle.

 

[TheOtherNick]

Thats what cams do. You can raise the idle a bit if you want to smooth it out.

 

[Silver GTP]

This isn't the lope that I would expect from a cam. It seems like it's about to stall when the idle bumps back up. This cycle happens about every 5 seconds. This is normal? If so, how much does the idle need to be bumped to hold stable? 50? 100?

 

[shawngtp]

THAT IS WHAT CAMS DO. IF you dont like it raise the Idle to about 900-1050. Can we get an exhaust clip please?

 

[TheOtherNick]

Set your idle at like 800.

 

[blueguy]

Set your idle at 700...and love it.

 

[99prixgt]

you should raise that idle if you don't have a double roller