• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

rpms dipping under load.....



Re: Finally found vac leak!

Pay the $10 for the ZZP set? They're not expensive enough to be worth putting up with sealing some crappy ones.
 
Re: Finally found vac leak!

Did you try the penny trick with the stock EGR Pieces?

That is how I did it and I haven't had any issues...
 
Re: Finally found vac leak!

HAHAHAHA...youre silly.

take the EGR and cut the little brackets off the end of the tubes. RTV whatever coin fits well in those, i believe i used a quarter for the LIM one and a nickle for my header one. bolt them suckers back on with a dab more RTV and call it a day.

block off plates for $0.35. do i get a prize now?
 


Re: Finally found vac leak!

lol i threw my egr away....it was torn to shyt guess i should have kept those pieces...damn
 
Re: Finally found vac leak!

go to the junk yard with some tin snips. cut them off and walk out with them in your pocket.
 
Re: Finally found vac leak!

the plate i made for the rear header seems to be working fine i think...when i rev and listen i dont hear it leaking hopefully its not......
 


Re: Finally found vac leak!

hey guys my idle still sits abnormally low when im in drive and stopped at a light and if i switch on and off the headlights or turn the wheel (load the PS pump or alternator) my RPMS dip down and cause a close to stall vibration...if i got no vac leak is it a bad ALT or IAC?
 


You must log in or register to reply here.
Back
Top