Rocker Panel Dimensions

[pmk138]

Hello, Just wondering if anybody has dimensions with bend angles of the rocker panels for the 98 Grand Prix. I can get the dimensions off mine fairly easy, determining the angles will be a little bit of a PIA. I only need a small section of sheet metal, so I am just going to have something made up. Any help would be greatly appreciated!! Paul

 

[Thinksun]

I bought the basic aftermarket rocker panel and cut it to length to fit. For $30 I got enough to do both sides, cant be less for a custom made piece.

http://www.andysautosport.com/ponti...ior/rocker_panels/key_parts/kept00000165.html

 

[KitRae]

I bought the basic aftermarket rocker panel and cut it to length to fit. For $30 I got enough to do both sides, cant be less for a custom made piece.

Was this for a 2 Door or 4 Door? Just want to make sure I order enough and not Too Much. LOL.

Stupid Rocker Panels! I would leave them off if it wasn't for passing Safety.

 

[Thinksun]

They are the universal ones for a 4 door, I adjusted length as I needed for mine to replace damage- which is a 2 door. 2 and 4 door have same wheelbase and panel section goes wheel well to ww. These units dont have sills on them so they work perfect for rust repair, cut them to length and notch as required. I see your in London, just go to an auto parts store (even partsource-last resort) and order universal rocker panel replacement just like in the picture in link above- they order from Keystone/Cross-Canada. I get discount and they were $30, ask for a cash account discount- tell them you will be back to order lots of parts as you have a Grand Prix and they should offer you garage pricing.

I glued (auto panel adhesive) and pop riveted mine on using 3/16 rivets ( have an air riveter from Princess Auto). I also have a mig welder and this is a faster and structurally sound repair. http://www.levineautoparts.com/maxim814.html

Keystone http://ecat.crosscanadaparts.com/base/index.php?go=exprorder