• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

RKE Setup questions

ablank37821

New member
For starters this is a 2000 GP GT, my key fob progressively stopped working so I replaced the battery and it started working again. And now all of a sudden nothing, but if I hold the UNLOCK and LOCK buttons at the same time the horn sounds as if I locked and activated the security system. So I thought maybe something caused the program data to drop, dead battery over a few days or something to that affect. So I been trying to reprogram it and here's where I get a bit confused. I go through these steps:

Key out
doors closed
mall pgm fuse out
switch to acc and wait for the 4 chimes
then go from off to acc within 1 second
open and close a door
hold down UNLOCK and LOCK buttons on remote for 14-16 seconds
ignition off and key out
replace mall pgm fuse

now when i go from acc - off - acc I get a sequence of chimes 1, 1-2, 1-2-3 and that repeats 3 times then I do the door open and close and I get 1 chime when i open and one chime when i close then I proceed with the remote and i get a chime and a honk at about 6 secs and a chime at around 14.

I have done this repeatedly with no success, so I am wondering if I am doing something wrong or the BCM is just being stubborn
 


Back
Top