• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Resevoir for intercooler?



It's all the different pcv ports and other random ports i have no idea what they are. Anyway i basically just ended up rtving EVERYTHINGGG!!!

Sent from my LG-D851 using Tapatalk
 
Hey guys i totally spaced on the tensioner/alternator bracket one of the bolts is slightly longer and the tip isnt threaded which location does that one go? Thanks so much

Sent from my LG-D851 using Tapatalk
 
then g5 blower on an improperly "opened plenum" LIM will have a massive vac/boost leak at the pcv fresh air supply passage that is a partial arc next to the bbv opening. if you cut away the LIM plenum wrong youll have a real handfull
 


Ok can someone please clarify this for me because im slightly co fused. When wiring the relay one wire goes to a switched source. One goes to the battery or fusebox terminal. One goes to a chasis ground or maybe negative battery terminal? And one goes to power the pump itself. So do i just leave the ground wire on the pump plug disconnected or does the pumo ground wire get wired into the ground for the relay?

Sent from my LG-D851 using Tapatalk
 
Well I am officially intercooled running a 3.0 pulley stock timing and zero kr. Running really rich though from previous tune so I have to cut close to 10% fuel and ill add 2* timing and see how far I can take this e54, rockered, intercooled grand prix. Thank you everyone for all your help with this project!

Sent from my LG-H918 using Tapatalk
 


For curious people by adding the resevoir the intercooler capacity is around 1.5 gallons of coolant.

Sent from my LG-H918 using Tapatalk
 
Another interesting note is that my two 90* 3\4 elbows and my two 3/4 to 5/8 reducer 90* elbows were custom dremeled out of those stupid plastic elbows that are used for the lim.

Sent from my LG-H918 using Tapatalk
 
SgtMarshal said:
nice work, where did the pump go?
Click to expand...
I copied another member on here. It sits pretty low but that's how I wanted it so it could never potentially run dry and I got it used so its in a super easy spot to swap it out if and when it fails.

Sent from my LG-H918 using Tapatalk
 


Scottydoggs said:
thats a big ass res you got there.

turn that timing up some. :th_biggrin2:
Click to expand...
Ya I was going to get the one you had but then I was out and about at pep boys and they had this things, mounting bracket and all hardware for 10 bucks so I picked it up.

Sent from my LG-H918 using Tapatalk
 
You must log in or register to reply here.
Back
Top