Replacing Washer Fluid Level Sensor

[Singlealt]

I filled up my washer fluid the day on Monday, and yesterday, I noticed that I had a low washer fluid warning on my '06 Grand Prix. I popped the hood, and checked for fluid in the reservoir. When I opened the reservoir cap, I notice the float from the level sensor floating on top of the washer fluid. How hard is it to replace this level sensor/what is the procedure to replace the level sensor? Something that simple should be easy, but I know sometimes manufacturers make things more difficult than they need to be. If someone knows of this being answered in another forum, feel free to point it out, but I was unsuccessful in my searches.

Thanks in advance for the help,

 

[Fivefingerdeathpunch]

Pull the wheel well liner out or out of your way and you'll see the pump and sensor.

You'll need to remove the tire for the best room.

 

[Scottydoggs]

should be in the same location, or close to it.