Hi guys! I have a 2000 GTP. I'm replacing the power steering rack lines and taking out the rack to work on it. Does anyone have any tips/advice for removing the rack? I've never done it. I have done a lot of work myself to the car and am pretty good mechanically. I have the procedure from AllData but I'm looking to get some tips from people who have done it. Thanks!
Replacing the power steering rack
- Thread starter mrfreez
- Start date
00grandprixgtp
New member
drop rear sub frame bolts all the way out take front out 2 turns and pull it out if ur sway bar is broke nows the time to do it
Scottydoggs
Killa Bee
this vid while he uses a lift, you can do it the same way on the ground with jack stands and a jack to lower the rear of the sub frame.
pic of mine rack out. you can see how far you'll need to drop the frame. unbolting the dog bones lets the engine drop easier too.
pic of mine rack out. you can see how far you'll need to drop the frame. unbolting the dog bones lets the engine drop easier too.
Thanks a lot Scotty! The video and picture was very helpful! I'm lucky that I have a spot with a hoist and transmission stand to hold the subframe so I can do it almost exactly like the video. I doubt mine will come out as easy since I'm in eastern Canada where road salt eats everything!
Scottydoggs
Killa Bee
its not that bad. kinda sucks. but not the worst job ive done. (ive done mine twice now) second time i had the old one out in less then a hour, same for the install.