• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Replacing coolant temperature sensor

V

vertebrate

New member
I need to replace the coolant temperature sensor on my 2000 GTP and was wondering if there is a way to get it off without removing the exhaust pipe next to it. It's sandwiched in there pretty good. I can get the 19mm deep socket on there, but I have no room to actually work it with the ratchet.

Thanks,
Steve
 


The wrench is either knocking into the pipe, or the engine block. I don't have any ratcheting wrenches, so I may need to get one to take care of it, if that's the only other way.

Thanks
 
Were you able to get it off with the ratchet wrench? I'm trying to change the mother****** right now and quite frankly, I'm about to stick a piece of dynamite in the gas tank
 


I have ratcheting wrenches. It's quicker. Still a pain.

Now..if we were not talking W body and that stupid dogbone wasn't in the way. You'd have enough room to do it in minutes.
 
You must log in or register to reply here.
Back
Top