• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Replaced blower, resister, ignition. Still nothing

T

twoleos617

New member
So I just got done replacing the blower, resistor, and ignition. I plugged my wires in at the resistor and blower. I made sure my controls were off. Cranked the car and got nothing.
I checked fuses in the dash and under the hood. All are OK.
Checked for power at the resistor plug and showed no voltage. Checked both ends of the same plug for continuity throughout the whole connector and showed continuity for each section of the plug.
I don't think I have incoming power at this plug. Not sure where I need to go to backtrack that power cable. Any help would be appreciative.
 


You must log in or register to reply here.
Back
Top