• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

removing valve covers?

bps02gtp

bps02gtp

New member
Ok wtf?!?! I can't remove the front valve cover cuz that stupid piece that holds the dogbone is in the way! I removed two bolts and it won't come off still! Can anyone tell me how to get that stupid piece off?
 


?

the ICM/coil bracket has to have the s/c belt removed, s/c belt tensioner, then three nuts then the tensioner will move.
 
Ah. So there's a nut I can't see cuz of that stupid tensioner. Do I just need to remove the pulley on the tensioner?
 
Son of a biscuit. Honestly I only looked at it for 10 minutes but it pissed me off cuz I thought it would come off quickly lol alright well no biggie. Ill remove the pulley tomorrow and pull the cover off so I can replace gaskets and paint my covers :)
 


Ok and how do I remove that? I don't get much time so I need to know so I can do everything quickly.
 
Welcome to the W body world. W stands for worst to work on.

go take a look at a Bonneville, Park Ave or Riviera. Front cover comes off in under 30 seconds for any parapalegic.
 
Lol thats a good one. Try working on a 95 chrysler cirrus with a 2.5 and doin the water pump. Worst ever
 


anything that requires you to remove the engine mount and go up and down with the vehicle and motor separately is a huge pain in the a$$
 
You must log in or register to reply here.
Back
Top