• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recommend me a fuel plump please

CrazyGuy03

Active member
Hey it's been a while since I did a few fp upgrades for my buddies. Long enough for me to forget what we used.
I have a 03 - non Venturi looking for enough capacity for upcoming 65s and the possibility of e85 should it become cheaper and more common here in WNY
I am aware I might have to swap my 03 canister for a earlier model one as wellI seem to remember the walbro being the most popular but csnt remember what brand I heard bad reviews about.
I have heard / read about people having issues with 1/4 of gas and running lean at wot or stalling with 1/4 tank of gas left. Any suggestions ?Thanks
 
Last edited:


Have you looked at this guy?:

http://www.amazon.com/AEM-50-1200--...-1&keywords=AEM+50-1200+E85+In-Tank+Fuel+Pump

That's what I'm running. I fit it into an old Airtex E3937M can. Didn't take too much finagling.

3c96e4b4-5d37-4ff1-b772-b5b3c960a23d_zps56e441cd.jpg
 
Perfect. Thank you. I need opinions/ideas.
I put a new stock airtex can in there 2 years with the intentions of swapping out the pump later on for a high flow one.
 
Back
Top