• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

rebuild kits?

GOINDEF

GOINDEF

New member
i was wondering if anyone knew if there is a rebuild kit or what parts should be replaced when rebuilding a 3.8. the engine has 193K on it and I'd like to make it like new. any help would be great
 


I'd start with water pump.ps pump,all gaskets, lifters, thats just a couple things. I guess it really depends on how far into the engine you want to go.
 
so actually put a new water pump and ps pump on there?
I basically just want it to be like new, so it'll last another 150K+ miles
 
Basically replace anything that can wear so any and all bearings or parts that wear like o-rings, main bearings, lifters, pushrods, valve springs, valve seals, water pump, P/S pump, idler pulleys, tensioners etc.
 
Depends what you are looking to spend
if your going to do a full rebuild your looking at around 2000 thats with machining all gaskets, new pistons, check crank shaft tru it up and polish as well as cam
new oil pump, new timing set,bearings,rings,head bolts,new lifters, Head work magna flux,valve job, check all rockers/rods

And thats with you doing all assembly most machine shops will build the bottom end though around here the charge 400 extra

then add on a new alt/power sterring/water pump

or you could find a low mileage short block have your heads checked/valve job and new wtr pmp/alt/pwr str all pulleys and tensioners
for around 1200
 


You must log in or register to reply here.
Back
Top