Re: wa04compg's- 04 CompG Vogtland FE3 Pg21

[HVACgtp]

Re: My 04CompG-Lame Video Pg. 13

Man that things moves, and what all you got into it again?

 

[wa04compg]

Re: My 04CompG-Lame Video Pg. 13

Homemade intake, Speed daddy headers, ZZP 1.9 Rockers, 3.5 pulley, and custom tune via HPT

 

[wa04compg]

Re: My 04CompG-Lame Video Pg. 13

Oh and shift kit!

 

[dmahlikGT]

Re: My 04CompG-Lame Video Pg. 13

now thats a pull! Pretty quick bro. Were you spinning when you floored it?

 

[dmahlikGT]

Re: My 04CompG-Lame Video Pg. 13

Intercool it, drop to a 3.2 pulley and retune and you'll be even faster.

 

[HVACgtp]

Re: My 04CompG-Lame Video Pg. 13

I think I might follow in your footsteps, but run a 3.6 and a diff tune!

 

[dmahlikGT]

Re: My 04CompG-Lame Video Pg. 13

Thats funny I was gonna follow yours after I saw your vid. If income tax looks good ill get rockers and prob drop down to a 3.5.

 

[wa04compg]

Re: My 04CompG-Lame Video Pg. 13

It was torque steering pretty good in that pull...for all you guys I would start with a 3.6 and a good tune...with my 3.5 without rockers I had couple degrees of kr....3.6 some flow mods and a healthy tune will make a world of difference

 

[DanPrixGTP]

Re: My 04CompG-Lame Video Pg. 13

Pulls good for a 3.5 and supporting mods.

Im impressed.

 

[wa04compg]

Re: My 04CompG-Lame Video Pg. 13

Thanx man I think it pulls pretty good!

 

[blueguy]

Re: 04CompDD-Updated 12-2

how hard is it to install rockers?? never did it before, never had the need. but for future referance!

prob about as hard as doing the lim gaskets

It's easier than LIM's...because just the VC's have to come off.

No mess.

 

[REDCRAPGP]

Made another Video!

And then he proceeds to the closest gas station to full up

 

[HVACgtp]

Re: My 04CompG-Lame Video Pg. 13

If you install rockers do you need new springs?

 

[blueguy]

Re: My 04CompG-Lame Video Pg. 13

how hard is it to install rockers?? never did it before, never had the need. but for future referance!

If you install rockers do you need new springs?

Go research it, these are members rides threads for a reason, not tech discussion. The topic has been covered plenty of times.

 

[REDCRAPGP]

If you install rockers do you need new springs?

Not necessarily but it's best to go ahead and change them out especially if you have high mileage and to avoid any valve float you may have in the upper rpms.

 

[blueguy]

Re: My 04CompG-Lame Video Pg. 13

Basically, if you don't upgrade springs when you do rockers, you're a dummy.

 

[HVACgtp]

Re: My 04CompG-Lame Video Pg. 13

Thank, and I was asking the op mainly what he did since it pertains to his ride and it's mods

 

[REDCRAPGP]

And rockers are pretty easy to install...I had them and then got smart and went the cam route valve springs can be a pain in the ass though to install but if you got a decent compressor and rent a valve springs its rather easy

 

[blueguy]

Re: My 04CompG-Lame Video Pg. 13

Thank, and I was asking the op mainly what he did since it pertains to his ride and it's mods

I think you missed the point, but whatevs.

 

[HVACgtp]

Re: My 04CompG-Lame Video Pg. 13

I got the point