random misfires

[BoostJunki3]

hey guys every once in awhile i punch it in my car and ill studder terribly and i can feel it misfiring bad...wondering what it could be ignition module or coils maybe?

 

[FoSHO99]

Should switch to AL104's.

 

[BoostJunki3]

i had al104s in before and it still happend...tried 605s this time to see if i could get away with it for better idle/mileage

 

[FoSHO99]

i had al104s in before and it still happend...tried 605s this time to see if i could get away with it for better idle/mileage

Ideally you would want to run 104's, but you could probably change wires/packs or clean them until the issue is solved.

 

[BoostJunki3]

Ideally you would want to run 104's, but you could probably change wires/packs or clean them until the issue is solved.

ok thanks good to know...

 

[TheOtherNick]

If you could scan you could switch the coils around to see if the miss follows a coil.

 

[BoostJunki3]

If you could scan you could switch the coils around to see if the miss follows a coil.

good idea....how come my aeroforce is reading 0 misfires tho?

 

[TheOtherNick]

Are you in the missfire setting that shows all 6 cylinders?

 

[BoostJunki3]

Are you in the missfire setting that shows all 6 cylinders?

yes do i need to have that up while doing a pull or does it monitor record them so when i open it it shows past misfires that have occured over time?

 

[TheOtherNick]

It is only in real time. So you have to have it open when doing the run.

 

[BoostJunki3]

ok thanks