• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Quick Cylinder question!

turn the key halfway between lock and on and the tranny should unlock. put your foot on the brake, put it in neutral then set the parking brake and let go of the brake slowly and it should roll back a little. then put the car back in park and take out the key.

THEN try moving the engine forward and putting the dogbone in the second hole.

With two people, only one of them needs to have any strength to push the engine forwards.
 


matt5112 said:
turn the key halfway between lock and on and the tranny should unlock. put your foot on the brake, put it in neutral then set the parking brake and let go of the brake slowly and it should roll back a little. then put the car back in park and take out the key.

THEN try moving the engine forward and putting the dogbone in the second hole.

With two people, only one of them needs to have any strength to push the engine forwards.
Click to expand...


hmm i shall try this tommorow

except what do you mean by putting the dogbone in the second hole?
 
Look at the dogbone on the passengers side and look at the engine end of it, there should be another hole in the bracket.
 
yep. once i get the rear ones done i might take a crack at installing my headers

because the guy that was supposed to do it. is swamped with Autorepairs
 


You must log in or register to reply here.
Back
Top